BeastGasm Electric Water Sprayer – User Guide

Enjoy effortless control and customizable performance with the BeastGasm Electric Water Sprayer. Designed for convenient operation, this rechargeable device features three adjustable spray settings, a generous 330 mL water reservoir, and a USB Type-C charging port.

Whether you're getting started or looking for a simple way to operate and maintain your device, this guide covers everything you need to know—from setup and spray adjustment to cleaning, charging, and proper care.

How to Use the Electric Water Sprayer

Follow these steps to assemble and operate your BeastGasm Electric Water Sprayer correctly.

Step 1: Fill the Water Reservoir

Add an appropriate amount of clean water to the reservoir. Avoid overfilling, and ensure the reservoir is properly closed or secured before operating the device.

Important: Thick, highly viscous, or residue-forming liquids are not recommended. They may obstruct the tubing, interfere with the spray mechanism, or make cleaning more difficult.

Step 2: Connect the Spray Nozzle Tube

Insert the spray nozzle tube into the designated connection port on the electric sprayer. Make sure it is securely attached to help prevent leakage or disconnection during operation.

Step 3: Attach the Hose

Connect the hose securely to the designated nozzle assembly. Before turning on the device, check that the hose and all connection points are properly fitted and free from visible damage.

Step 4: Turn On the Device

Press the power button to start the electric water sprayer. Make sure the components are connected correctly before activation.

Step 5: Select Your Preferred Spray Setting

Press the setting button to cycle through the three available spray levels. Select the setting that best suits your intended use.

If the spray becomes weak or irregular, turn off the device and check the water level, hose connections, and tubing for possible obstructions before continuing.

Step 6: Turn Off and Disconnect After Use

Press the power button to switch off the device. Disconnect the accessories as appropriate for cleaning, following the product's assembly instructions.

Cleaning and Maintenance

Regular cleaning helps maintain performance, reduce residue buildup, and extend the service life of your device.

Clean After Every Use

Clean the device promptly after use. Empty any remaining water and rinse the applicable reservoir, hose, and tubing with clean water according to the manufacturer's cleaning instructions.

If Mildly Viscous Liquids Have Been Used

If the device has been exposed to a mildly viscous liquid that is compatible with the product, flush the water pathway thoroughly with clean water to remove residue. Do not use thick or highly viscous substances that could clog the internal mechanism.

Keep the Charging Port Dry

Before charging, make sure the device and charging port are completely dry. Never connect the device to a power source while it is wet.

Store Properly

After cleaning, allow the components to dry completely before storing them in a clean, dry location. Avoid leaving liquid inside the reservoir or tubing for extended periods.

Avoid Unapproved Cleaning Methods

Do not use abrasive cleaners, harsh chemicals, or cleaning methods that are not approved by the manufacturer. Do not assume that every component can be boiled, sterilized, or submerged independently.

Charging Instructions

The BeastGasm Electric Water Sprayer features a USB Type-C charging port for convenient recharging.

• Use a compatible standard charger and suitable USB Type-C charging cable.

• Do not use fast-charging adapters or fast-charging modes.

• Confirm that the device and charging port are completely dry before connecting the charging cable.

• Keep the charging port protected from water and moisture during charging.

• Disconnect the charger when charging is complete, following the manufacturer's instructions.

Charging Safety: Never charge the device while it is wet, immersed in water, or exposed to excessive moisture. Follow the manufacturer's specified charging voltage and current requirements.

Product Specifications

• Product Name: BeastGasm Electric Water Sprayer

• Spray Settings: 3 adjustable levels

• Water Reservoir Capacity: 330 mL

• Battery Capacity: 1,200 mAh

• Charging Port: USB Type-C

• Recommended Charging Method: Compatible standard charger; fast charging prohibited

• Waterproof Rating: IPX7

Important Safety Reminders

• Inspect the device, tubing, and connections before each use.

• Stop using the device if you notice leakage, unusual operation, visible damage, or signs of battery malfunction.

• Do not disassemble or modify the internal electrical components.

• Keep the charging port dry and follow the specified charging requirements.

• Clean and dry the device after every use.

• Keep the device and charging accessories out of reach of children.

Enjoy a better experience with proper care. With its three adjustable spray settings, generous reservoir, and rechargeable design, the BeastGasm Electric Water Sprayer is built for convenient operation. Follow the instructions above to help maintain its performance and keep it ready for your next use.

FAQs

Q1: How many spray settings does the device have?

The device has three adjustable spray levels. Press the setting button to cycle through the available options.

Q2: Can I use thick liquids in the water reservoir?

No. Thick or highly viscous liquids are not recommended because they may clog the tubing or interfere with the spray mechanism. Clean water is recommended unless the manufacturer confirms that another liquid is compatible.

Q3: How should I clean the device after use?

Turn off the device, empty any remaining liquid, and rinse the applicable water pathway with clean water according to the manufacturer's instructions. Allow the components to dry completely before storage.

Q4: Can I use a fast charger?

No. Use a compatible standard charger and follow the manufacturer's charging specifications. Do not use fast charging.

Q5: Does the IPX7 rating mean I can charge the device in water?

No. An IPX7 rating does not mean the device can be charged while wet or immersed. Keep the charging port dry and never charge the device near or in water.